Galvanized Steel Pre Painted Steel Sheet With 7-8 Micron Polyester And 5 Micron Primer For Durable Exterior Applications In 1500mm To 5800mm Length

Galvanized Steel Pre Painted Steel Sheet With 7-8 Micron Polyester And 5 Micron Primer For Durable Exterior Applications In 1500mm To 5800mm Length

1.Product Overview

Pre painted steel sheet is used where a coated steel substrate and a finished color surface are required in one material. This product range is suitable for roofing sheets, wall cladding, façade panels, appliance panels, and general fabricated sheet parts where appearance, corrosion resistance, and forming compatibility need to be considered together.

The available size range covers 0.18–1.2mm thickness, 700–1250mm width, and 1500–5800mm length. Base metal options include galvanized steel, galvalume steel, and cold rolled steel, which allows the sheet to be selected according to service environment and fabrication route.

2.Technical Solution

The product uses a painted coating system built on steel substrate. The top side uses 15–20 micron polyester with 5 micron primer. The back side uses 5–7 micron, or 7–8 micron polyester with 5 micron primer. In actual use, surface durability depends on the combination of substrate type, primer support, top coat build, and handling during fabrication and installation.

The available coating systems are PE, SMP, HDP, and PVDF. PE is generally selected for standard applications. SMP is used where better weather resistance is required. HDP is suitable where stronger coating durability is needed. PVDF is more suitable for applications requiring stronger UV resistance, chemical stability, and long-term finish retention in exposed service conditions.

3.Specifications

4.Application

• This material is suitable for roofing sheets, wall cladding, façade panels, and other building envelope parts.
• It can also be used for appliance panels, interior decorative panels, automotive related fabricated parts, transportation equipment panels, furniture parts, signage, and electrical enclosures.
• For projects that require a finished visible surface and a coated substrate in one material, pre painted steel sheet is a practical option for direct fabrication.

5.Processing

• The sheet can be supplied in cut length for direct fabrication.
• It is suitable for cutting, bending, roll forming, profiling, and general sheet metal processing.
• When the final part has visible surface requirements, protective film on the top side can be selected to reduce handling damage during transport and installation.
• Base metal and coating type should be selected together according to forming severity, outdoor exposure, and required service condition.

6.Advantages

• The 0.18–1.2mm thickness range is suitable for light to medium sheet fabrication.
• The 700–1250mm width range matches common panel and cladding processing routes.
• The 1500–5800mm length range supports both shorter fabricated parts and larger panel layouts.
• Multiple base metal options allow selection by corrosion environment and fabrication requirement.
• Multiple coating systems allow the sheet to be matched to standard use, weather resistant use, or longer-life exterior applications.
• RAL color customization supports project-based appearance matching.

7.How to Choose

• Choose galvanized steel base for general painted sheet applications where zinc-coated substrate is required.
• Choose galvalume steel base when the project requires aluminum-zinc coated substrate and improved corrosion resistance.
• Choose cold rolled steel base when the application is mainly for interior or protected-use fabrication.
• Choose PE for standard use, SMP for stronger weather exposure, HDP for higher durability demand, and PVDF for applications requiring stronger UV resistance and longer finish retention.
• Choose thickness according to panel rigidity, forming route, and installation span.
• Choose length according to blank layout, transport condition, and installation size.

8.FAQ

Q1. What is the thickness range of this pre painted steel sheet
The thickness range is 0.18–1.2mm.

Q2. What width range is available
The width range is 700–1250mm.

Q3. What length range is available
The length range is 1500–5800mm.

Q4. What base metals are available
Available base metals are galvanized steel, galvalume steel, and cold rolled steel.

Q5. What coating systems are available
Available coating systems are PE, SMP, HDP, and PVDF.